Logic Level Shifter Bi-Directional 8 Channel

This bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and 1.8V devices. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the 'VCCA' pin, low voltage (3.3V for example) to 'VCCB' pin, and ground from the system to the 'GND' pin.
$9.30

This bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and 1.8V devices. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the 'VCCA' pin, low voltage (3.3V for example) to 'VCCB' pin, and ground from the system to the 'GND' pin.

Product tags
Customers who bought this item also bought

Logic Level Shifter Bi-Directional 4 Channel

This bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and 1.8V devices. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the 'HV' pin, low voltage (3.3V for example) to 'LV' pin, and ground from the system to the 'GND' pin.
$4.70

IR Sensor Sharp GP2Y0A21YK (10 - 80cm)

This little unit uses a beam of infrared light to reflect off an object to measure its distance. Because it uses beam triangulation to calculate distance, it is able to provide consistent and reliable readings which are less sensitive to temperature variation or the object’s reflectivity. The sensor outputs an analog voltage corresponding to the distance of the object, easily read by an Arduino, PIC, PI, or any other ADC chip.
$14.00

Jumper Wire Female-Female

A must have for anyone doing prototyping on project boards!
$1.90