Light Sensor

When light intensity is above the present threshold, there will be a digital output on the D0 pin. Light sensitivity can be adjusted through the potentiometer on board.
£5.60

When light intensity is above the present threshold, there will be a digital output on the D0 pin. Light sensitivity can be adjusted through the potentiometer on board.


Specification

Operating Voltage 3.3 - 5v
Signal Out Digital
Product tags
Customers who bought this item also bought

Arduino Mega 2560 Compatible + Cable

The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
£37.40

Wireless Transceiver nRF905 433 MHz

nRF905 is a single chip radio transceiver for the 433/868/915MHz ISM band. The transceiver consists of a fully integrated frequency synthesizer, receiver chain with demodulator, a power amplifier, a crystal oscillator and, a modulator. The ShockBurst™ feature automatically handles preamble and CRC. You can easily configure the nRF905 through the SPI. Current consumption is very low, in transmit only 9mA at an output power of -10dBm, and in receive mode 12.5mA. Built-in power down modes makes power saving easily realizable.
£12.10