Infrared Obstacle Avoidance Sensor

When the module detects an obstacle, the green indicator lights up, giving a low-level output signal in the OUT pin. The module detects distance of 2 - 30cm, detection angle of 35 degrees. Distance can be adjusted through the potentiometer.
€4.70

When the module detects an obstacle, the green indicator lights up, giving a low-level output signal in the OUT pin. The module detects distance of 2 - 30cm, detection angle of 35 degrees. Distance can be adjusted through the potentiometer.


Specification

Input Voltage 3.3 - 5v
Effective Distance 2 - 30cm
Detection Angle 35°
Dimension 32mm x 14mm
Customers who bought this item also bought

Arduino Mega 2560 Compatible + Cable

The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
€37.40

Wireless Transceiver nRF905 433 MHz

nRF905 is a single chip radio transceiver for the 433/868/915MHz ISM band. The transceiver consists of a fully integrated frequency synthesizer, receiver chain with demodulator, a power amplifier, a crystal oscillator and, a modulator. The ShockBurst™ feature automatically handles preamble and CRC. You can easily configure the nRF905 through the SPI. Current consumption is very low, in transmit only 9mA at an output power of -10dBm, and in receive mode 12.5mA. Built-in power down modes makes power saving easily realizable.
€12.10