LCD display module with green/blue backlight. Wide viewing angle and high contrast and can display 128-lines * 64-characters. Small and light appearance, easy and convenient to use. The display is fully programmable and can display a combination of both graphics and text. It can operate in both parallel and serial (SPI) modes which can be configured by the external pin PSB. In SPI mode only 3 data pins are required to drive this display. No potentiometer is required to set the contrast as this is pre set by the factory to optimum level. The controller of this LCD is ST7920. Arduino compatible.
Add a display to your project with this full 18-bit colour LCD TFT! This display uses SPI protocol to communicate, can be used for every microcontroller. It has built in level shifter so you can use it with a 3.3v or 5v logic.
Add a display to your project with this full 65K colour LCD TFT! This display uses SPI protocol to communicate, can be used for every microcontroller. This LCD is 3.3v logic, so remember to use a level shifter if you're working with 5v microcontrollers! This LCD also comes with a resistive touch!
OLED (Organic Light-Emitting Diode) display is 0.96" and has a resolution of 128 * 64 pixels. It uses a standard (configurable) serial interface for communication.By default the module is configured to use an SPI interface for serial interface but can be modified (soldering required) to communicate via I2C protocol. OLED is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays.