Bluetooth Transceiver HC-05

Suitable for Bluetooth adapter, Bluetooth phone use. Can set the module control parameters and control commands issued via AT commands. Provide 7 input and output ports, scalable user IO resources. Work status indicators; connection with the non-connection state signal output, easy to track the status of module MCU. Great for embedded wireless serial transmission alternatives.
€12.10

Suitable for Bluetooth adapter, Bluetooth phone use. Can set the module control parameters and control commands issued via AT commands. Provide 7 input and output ports, scalable user IO resources. Work status indicators; connection with the non-connection state signal output, easy to track the status of module MCU. Great for embedded wireless serial transmission alternatives.


Specification

Bluetooth Specification v2.0+EDR
USB protocol USB v1.1/2.0
Frequency 2.4GHz ISM band
Modulation GFSK(Gaussian Frequency Shift Keying)
Transmit Power not more than 4dBm, Class 2
Sensitivity not more than -84dBm at 0.1% BER
Rate Asynchronous: 2.1Mbps(Max) / 160 kbps
Synchronous 1Mbps/1Mbps
Security Features Authentication and encryption
Support Profiles Bluetooth serial port (master & slave)
Operating Voltage 3.6 - 6v, 50mA
Working Temperature –5°C to 45°C
Max Serial Baud Rate 1382400bps, support for hardware flow control transfer
Size 27mm x 13mm x 2mm
Range ~10m
Product tags
Customers who bought this item also bought

Arduino Nano Compatible + Cable

The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) or ATmega168 (Arduino Nano 2.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.
€16.80

GPS Module NEO-6M

ublox/u-blox NEO-6M GPS module with antenna and build-in EEPROM. This module is compatible with APM2 and APM2.5, and EEPROM can save all your configuration data.
€22.40

Breadboard Power Supply Module

This breadboard adapter is a must have for prototyping on a breadboard. It supplies a selectable 3.3v and 5v to the breadboard rails with an on/off switch.
€4.70